DuPont™ Interior Kitchen & Bath Caulk enhanced with Teflon® surface protector
Application: 

• Clean surface to be caulked.
• For gaps greater than ½” deep, use a backer rod.
• Insert caulk tube into the caulk gun.
• Cut the dispensing nozzle at a 45° angle.
• While slowly squeezing the caulk gun trigger, gently push the sealant nozzle along the gap
• to be sealed.  Ensure complete contact is made on both surfaces being sealed.
• Smooth applied bead with a moistened cloth.
• Clean tools with soap and water.
• Allow 4 to 6 hours curing time before applying paint.
• Cured bead should be between 1/8” and ½” wide. 
• Allow 36 hours curing time before exposing to a wet or damp environment.
• Coverage: 54 linear feet for a 3/16" bead.
• Not intended for areas that will be permanently submerged in water. Keep unused product from freezing. Do not use on surfaces that come in contact with food.

DuPont™ Exterior Door, Window & Siding Caulk made with Kevlar®
Application:  

• Clean surface to be caulked.
• For gaps greater than ½” deep, use a backer rod.
• Insert caulk tube into the caulk gun.
• Cut the dispensing nozzle at a 45° angle.
• While slowly squeezing the caulk gun trigger, gently push the sealant nozzle along the gap to be sealed.  Ensure complete contact is made on both surfaces being sealed.
• Smooth applied bead with a moistened cloth.
• Clean tools with soap and water.
• Allow 4 to 6 hours curing time before applying paint.
• Cured bead should be between 1/8” and ½” wide. 
• Allow 24 hours curing time before exposing to a wet or damp environment.
• Coverage: 54 linear feet for a 3/16" bead.
• Not intended for areas that will be submerged in water. Keep unused product from freezing. Do not use on surfaces that come in contact with food. Not intended for use with Tyvek®.

DuPont™ Painters Caulk with Speed Dry™ Technology
Application: 

• Clean surface to be caulked.
• For gaps greater than ½” deep, use a backer rod.
• Insert caulk tube into the caulk gun.
• Cut the dispensing nozzle at a 45° angle.
• While slowly squeezing the caulk gun trigger, gently push the sealant nozzle along the gap to be sealed.  Ensure complete contact is made on both surfaces being sealed.
• Smooth applied bead with a moistened cloth in 20 minutes or less.
• Clean tools with soap and water.
• May be spray painted immediately.  Allow 30 minutes curing time before applying paint with a paint brush. 
• Cured bead should be between 1/8” and ½” wide. 
• Allow 24 hours curing time before exposing to a wet or damp environment.
• Coverage: 54 linear feet for a 3/16" bead.
• Not intended for areas that will be submerged in water. Keep unused product from freezing. Do not use on surfaces that come in contact with food.

DuPont™ Driveway & Repair Caulk made with Kevlar®
Application: 

• Clean surface to be caulked.
• For gaps greater than ½” deep, use a backer rod.
• Insert caulk tube into the caulk gun.
• Cut the dispensing nozzle at a 45° angle.
• While slowly squeezing the caulk gun trigger, gently push the sealant nozzle along the gap to be sealed.  Ensure complete contact is made on both surfaces being sealed.
• Smooth applied bead with a moistened cloth.
• Clean tools with soap and water.
• Allow 4 to 6 hours curing time before applying paint.
• Cured bead should be between 1/8” and ½” wide. 
• Allow 24 hours curing time before exposing to a wet or damp environment.
• Coverage: 54 linear feet for a 3/16" bead.
• Not intended for areas that will be permanently submerged in water. Keep unused product from freezing. Do not use on surfaces that come in contact with food.

DuPont™ Concrete & Masonry Caulk made with Kevlar®
Application: 

• Clean surface to be caulked.
• For gaps greater than ½” deep, use a backer rod.
• Insert caulk tube into the caulk gun.
• Cut the dispensing nozzle at a 45° angle.
• While slowly squeezing the caulk gun trigger, gently push the sealant nozzle along the gap to be sealed.  Ensure complete contact is made on both surfaces being sealed.
• Smooth applied bead with a moistened cloth.
• Clean tools with soap and water.
• Allow 4 to 6 hours curing time before applying paint.
• Cured bead should be between 1/8” and ½” wide. 
• Allow 24 hours curing time before exposing to a wet or damp environment.
• Coverage: 54 linear feet for a 3/16" bead.
• Not intended for areas that will be permanently submerged in water. Keep unused product from freezing. Do not use on surfaces that come in contact with food.