How to Use Window & Door Premier Silicone

Follow these simple instructions for caulking windows, doors and siding areas. Applying DuPont™ silicone sealants is simple, and all of the products easily clean up with mineral spirits. DuPont™ Window & Door Premier Silicone is available in either squeeze tubes or cartridges which require a caulk gun to apply product.

 

Surface Preparation:

The area must be thoroughly cleaned before caulking any joint, gap or crack. Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint and old caulk. Use masking tape to prevent sealant from sticking to adjoining areas. Remove tape immediately after sealant has been tooled. Only apply sealant when surface and air temperatures will remain above 40°F. Do not apply on surfaces that are above 100°F.   
 

Application:

• Clean surface to be caulked.
• For gaps greater than 1/2″ deep, use a backer rod.
• Insert caulk tube into the caulk gun.
• Cut the dispensing nozzle at a 45° angle.
• Puncture inner foil seal.
• While slowly squeezing the caulk gun trigger, gently push the sealant nozzle along the gap to be sealed. Ensure complete contact is made on both surfaces being sealed.
• Smooth applied bead with a moist cloth or finishing tool.
• Clean tools with mineral spirits.
• Cured bead should be between 1/8″ and ½″ wide.
• Allow two hours curing time before exposing to a wet or
damp environment.

Coverage: 53 linear feet for a 3/16″ bead (9.8 oz cartridge) and
15 linear feet for a 3/16″ bead (2.8 oz squeeze tube).

Not intended for areas that will be painted or submerged in water. Do not use in aquariums. Do not use on surfaces that come into contact with food. Keep unused product from freezing.

This product is not intended for use with DuPont™ Tyvek®. We recommend using DuPont™ Commercial Sealant or DuPont™ Residential Sealant.

 

Frequently Asked Questions:

• What is Home Sealing?
Home Sealing is a process recommended by the EPA ENERGY STAR® program to increase the energy efficiency of your home by improving the effectiveness of the building envelope. Sealing air leaks helps to enhance the performance of your insulation and may help to cut up to 20% of your energy bill, according to the EPA. Visit www.energystar.gov/index.cfmc=home_sealing.hm_improvement_sealing for more information.

• What is a home envelope?
The exterior of your home is also called the ″envelope″ or shell. The insulation, outer walls, ceiling, doors, windows and floors all work together to control airflow in and out of the structure, repel moisture and prevent heat from being lost or gained inside your home. A high-performance envelope helps maintain a consistent interior temperature even under extremely hot or cold conditions. The goal of Home Sealing is to help improve the home envelope to make homes more comfortable and energy-efficient.

• Is Home Sealing something I can do myself?
Absolutely! You can seal holes, weather-strip doors, caulk around gaps in pipes and wires, floors, basements and crawl spaces. Remember, it's important to always air-seal before adding insulation. ENERGY STAR® has a written Do-It-Yourself Guide to help with the process of Home Sealing, which can be downloaded by going to http://www.energystar.gov/ia/partners/publications/pubdocs/Seal_and_Insulate.pdf.
To find out more information about ENERGY STAR®, go to www.energystar.gov.

• Why is DuPont™ Window & Door Premier Silicone good for sealing air leaks?
DuPont™ Window & Door Premier Silicone is ideal for home sealing for numerous reasons:

»It can be exposed to rainwater in just two hours after it has been applied, making it an excellent choice for sealing exterior surfaces.
»It has excellent adhesion to a wide variety of building substrates.
»It forms a weatherproof seal.

• What type of surface preparation is needed prior to applying the product?
It is important that the area be thoroughly cleaned before caulking any joint, gap or crack. Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint and old caulk. Only apply when caulk, surface and air temperatures will remain above 40°F. Do not apply on surfaces that are above 100°F.

• Can the product be painted?
No, only the Paintable Premier Silicone formula can be painted.

• Can it be used for interior applications?
Yes, DuPont™ Window & Door Premier Silicone is a premium 100% silicone rubber sealant that meets the rigid ASTM C-920 requirements and may be used on both interior and exterior applications. The sealant is ideal for trim, crown molding and many other interior applications.

• Does the product have mold and mildew protection?
Yes, DuPont™ Window & Door Premier Silicone contains a mildewcide, giving it excellent mold and mildew resistance.

• What is a mildewcide?
Mildewcide is a term for chemicals that retard the growth of mold and mildew. The DuPont™ Window & Door Premier Silicone contains a mildewcide that resists the growth of mold and mildew on the surface of the caulk after it is cured.

• Is DuPont™ Window & Door Premier Silicone VOC compliant?
Yes. All of the DuPont™ silicone sealants are in compliance with the CARB VOC regulations. The VOC content is less than 3%.  

• What do I use to clean excess product from tools or other surfaces?
All of the DuPont™ silicone sealants can be cleaned up with mineral spirits.

• Can I use DuPont™ Window & Door Premier Silicone with DuPont™ Tyvek® Weatherization products?
No. This product is not intended for use with DuPont™ Tyvek®. We recommend using DuPont™ Commercial Sealant or DuPont™ Residential Sealant.


Have you tried DuPont™ Window & Door Premier Silicone for your project?