The miracles of science™

Select Industry


Fish Farming Biosecurity

Routine Biosecurity Tasks

The following table indicates the additional routine biosecurity tasks required for a complete biosecurity programme.

 

Critical
Control
Point 

Product 

Dilution Rate 

Application Rate 

Frequency 

DuPont Vehicle
Disinfection
Programme

     
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Vehicles  Virkon® Aquatic  1:100  

All vehicles entering site should pass through a wheeldip filled with solution of Virkon® Aquatic.

For high risk situations please refer to DuPont’s Vehicle Disinfection Programme  

On arrival 

Personal
Biosecurity

         
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Footdips Virkon® Aquatic  1:100  Place footdips at all entrances, piers and cages.  Fill with a freshwater solution of Virkon® Aquatic at a dilution rate of 1:100 (1%)  On passing through area 
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Skin Hygiene  Hand Hygiene System 

 -

Hands should be washed and sanitised between areas using the DuPont Hand Hygiene System  On passing through area 
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Protective Clothing  Virkon® Aquatic  1:200  Rinse with clean water immerse in Virkon® Aquatic for 10 minutes and hang to dry  After each period of use 
Equipment           
Broodstock/
hatchery*

Freshwater Production

Seawater Production
 
Transport tanks & equipment  Virkon® Aquatic  1:200  Visibly clean  After each period of use 
Broodstock/
hatchery*

Freshwater Production
Carry bins, hand nets, weighing equipment  Virkon® Aquatic  1:200  Visibly clean  After each period of use 
Freshwater Production  Dip nets & tank brushes  Virkon® Aquatic  1:200  Immersion   Daily after use 
Freshwater Production  Vaccination equipment stage one 

Cleaning - Biosolve® Plus

 

Disinfection-
Virkon® Aquatic  

1:100 



1:200
Clean with Biosolve® Plus solution, rinse thoroughly with clean water and then disinfect thoroughly with Virkon® Aquatic solution  Between year classes and farm sites 
Freshwater Production  Vaccination equipment stage two  Virkon® Aquatic   1:50  Flush with Virkon® Aquatic solution leave for 5 minutes then thoroughly rinse with clean water  Between tanks and farm use 
Broodstock/
hatchery*

Freshwater Production

Seawater Production
Grading equipment 

Cleaning –
Biosolve® Plus


Disinfection-
Virkon® Aquatic  

1:200



1:200
Clean with Biosolve® Plus solution then disinfect thoroughly with Virkon® Aquatic solution  Daily after use 
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Tanks

Cleaning –
Biosolve® Plus


Disinfection-Virkon® Aquatic  

1:200



1:200 
Clean with Biosolve® Plus solution then disinfectthoroughly with Virkon® Aquatic solution  When empty 

Waste
Disposals

         
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Waste disposal area including skips & bins 

Cleaning –
Biosolve® Plus


Disinfection-
Virkon® Aquatic 

1:200



1:200 
Rinse with clean water immerse in Virkon® Aquatic for 10 minutes and hang to dry  Daily 

Biosecurity
Barriers

         
Broodstock/
hatchery*

Freshwater Production

Seawater Production

Processing
 
Path & roadway  Virkon® Aquatic 1:100

Brush or rake then disinfect with Virkon® Aquatic solution

Weekly basis 

* consult DuPont Animal Health Solutions for specialist broodstock and hatchery biosecurity programmes

The specified uses and registered claims of Biosolve® Plus and Virkon® Aquatic may vary from country to country.  Please contact DuPont Animal Health Solutions directly to verify country specific approved usages.