The miracles of science™

Select Industry


DuPont Microcircuit Materials

News

RESEARCH TRIANGLE PARK, N.C., October 7, 2011

DuPont Microcircuit Materials Presents New Low Temperature Co-fired Ceramic Materials Developments at IMAPS 2011

Features Next Generation GreenTape™ Materials for High Speed and High Frequency Electronic Packaging


Contact: DuPont
Ellen G. Pressley
919-248-5598
ellen.g.pressley@usa.dupont.com

GreenTape™ 9K5 LTCC material
DuPont Microcircuit Materials is introducing its newest GreenTape™ 9K5 LTCC material. Photo courtesy of DuPont. (High resolution image) 

DuPont Microcircuit Materials (DuPont), part of DuPont Electronics & Communications, is highlighting two key technical developments at the International Microelectronics and Packaging Society’s 44th International Symposium on Microelectronics, Oct. 9 – 13, 2011, in Long Beach, Calif.  The company’s newest product development, DuPont™ GreenTape™ 9K5 low temperature co-fired ceramic (LTCC) material with superior dielectric constant properties, is designed for higher speed, higher frequency and higher reliability applications.  DuPont also is presenting on methods of characterization for LTCC dielectrics in high frequency microwave and millimeter wave packaging.

"DuPont continues to lead the industry with its LTCC material systems technology,” said Scott E. Gordon, market segment manager, DuPont Microcircuit Materials.  “We continue to invest in advanced material systems, and we are now building on the success of the GreenTape™ 9K7 LTCC system offering.  We have developed the new GreenTape™ 9K5 material, placing greater emphasis on the growing market need for efficient and cost effective LTCC antennas within high speed, high reliability subsystems such as automotive radar and other applications operating above 50 GHz.  We look forward to a full commercial introduction of this new material set, and working closely with our customers to enable their most challenging new designs.”

The new development is expected to be introduced commercially during 2012.

LTCC material systems are successfully used in microwave and millimeter wave systems and are chosen because of their very low dielectric loss, high reliability properties and favorable cost-performance balance. To enable and extend applications of LTCC technology to millimeter frequency subsystems, DuPont has developed a new low dielectric constant materials system, DuPont™ GreenTape™ 9K5 LTCC, which has a dielectric constant of 5.80 (at 10 GHz) that is compatible with the commercial DuPont™ GreenTape™ 9K7 LTCC System. This is achieved without compromising excellent microwave loss properties of the GreenTape™ 9KX LTCC platform. These materials systems enable high-speed, high reliability applications while also realizing efficient antennas on LTCC.

The paper,Introducing the DuPont™ GreenTape™ 9K5 LTCC System with Low Dielectric Constant,” will be presented on Wed., Oct. 12, during the Ceramic and LTCC Packaging I Session (WA3).  Deepukumar M. Nair, applications development manager, will present initial characterization of the new DuPont™ GreenTape™ 9K5 LTCC system consisting of low K dielectric tape, gold and silver conductors to evaluate the effects of chemistry, processing conditions, processing latitude, microstructure and microwave performance. Test coupons with various transmission and resonating structures are designed, fabricated, and tested for the evaluation of transmission losses and dielectric properties. Stability of the material system over multiple re-fire steps is also examined

Nair also will present a paper entitled, “Bulk and In-Circuit Dielectric Characterization of LTCC Tape Systems Through Millimeter Wave Frequency Range,” on Wed., Oct. 12, as part of the Ceramic and LTCC Packaging II Session (WP3).  For LTCC based designs, the use of dielectric constant of bulk material can lead to deviations between the performance expected at the design stage and for the fabricated circuit. Such deviations are a significant concern for broadband circuits as well as for circuits with sharp resonant behavior such as filters. One of the significant sources of deviation between bulk LTCC and “in-circuit” dielectric constant is the nature of the thick film metallizations used in LTCC technology. The paper describes a comprehensive characterization of three DuPont™ GreenTape™ LTCC systems, 951, 943 and 9K7, in the frequency range 10 to 65 GHz. Both bulk and “in-circuit” dielectric properties with silver and gold metallizations are studied to quantify the deviations in dielectric properties. This comprehensive characterization provides key design data for LTCC designers in the 10 – 65 GHz frequency range.

 DuPont Microcircuit Materials has over 40 years of experience in the development, manufacture, sale and support of specialized thick film compositions for a variety of electronic applications in the automotive, display, photovoltaic, biomedical, industrial, military and telecommunications markets.  For more information on DuPont Microcircuit Materials, visit http://mcm.dupont.com.

DuPont (NYSE: DD) has been bringing world-class science and engineering to the global marketplace in the form of innovative products, materials, and services since 1802.  The company believes that by collaborating with customers, governments, NGOs, and thought leaders we can help find solutions to such global challenges as providing enough healthy food for people everywhere, decreasing dependence on fossil fuels, and protecting life and the environment.  For additional information about DuPont and its commitment to inclusive innovation, please visit http://www.dupont.com.

Forward-Looking Statements:  This news release contains forward-looking statements based on management’s current expectations, estimates and projections.  The company does not undertake to update any forward-looking statements as a result of future developments or new information.  All statements that address expectations or projections about the future, including statements about the company’s strategy for growth, product development, market position, expected expenditures and financial results are forward-looking statements.  Some of the forward-looking statements may be identified by words like “expects,” “anticipates,” “plans,” “intends,” “projects,” “indicates,” and similar expressions.  These statements are not guarantees of future performance and involve a number of risks, uncertainties and assumptions.  Many factors, including those discussed more fully elsewhere in this release and in DuPont’s filings with the Securities and Exchange Commission, particularly its latest annual report on Form 10-K, as well as others, could cause results to differ materially from those stated.  These factors include, but are not limited to changes in the laws, regulations, policies and economic conditions of countries in which the company does business; competitive pressures; successful integration of structural changes, including acquisitions, divestitures and alliances; research and development of new products, including regulatory approval and market acceptance, and seasonality of sales of agricultural products.