The Cyrel® Basic Training provides basic knowledge about the Cyrel® printing plates system and plate processing.
Basic training (3 days) Following subjects will be covered:
- Cyrel® System Overview
- Cyrel® Plate types (product features and benefits)
- Cyrel® Equipment
- Basics of digital workflow
- Cyrel® Plates storage and handling
- Different processing steps and basic test
- Cyrel® washout solvents
- Plate room safety
- Requirements/Specifications of film negatives
- Calculation of elongation factor
- Trouble shooting
To assure maximum effectiveness and to have enough room for "hands-on" work, the number of participants per session is min 4, max 8 persons.
The 3-days training starts on Tuesday morning and will be finished on Thursday around lunch time. As the training starts on Tuesday at 9.00 a.m. the participants should arrive on Monday late afternoon or evening. The departure should not be scheduled prior to 4.00 pm on Thursday afternoon.
The course value is 680,00 Euro per person.
Training Dates 2009
3rd - 5th March (English)
28th - 30th April (German)
6th - 8th October (English)
10th - 12 November (German)
Advanced Cyrel® FAST Workshop (digital and analog) for Experienced Plate-Operators
- Plateroom Safety
- Digital and analog thermal plates – overview
- Plate Handling, Cleaning and Storage
- Thermal Equipment Overview
- Hands-On Platemaking
- Advanced Platemaking Tips and Techniques
- Specifications for the artwork / job design (incl. film specification)
- Quality Control
- Troubleshooting Plate Issues
This training will take 1 day.
The course value is 350,00 Euro per person.
Our Cyrel® Advanced Training offers to our customers the opportunity to refresh and extend the knowledge of their employees. The content of the training will be composed according to the individual requirements of our customers.
The following topics can be covered:
- Trouble shooting (Customers are welcome to bring their own problem plates)
- Cyrel® alternative solvents
- CyFOS-Cyrel® Flexo Optimisation System
- Cyrel® Digital Imager – Digital Workflow of flexo plate making
- Cyrel® Thin-plate-technology
- Microflex mounting system
- Cyrel® FAST Technology
- Cyrel® round sleeves
- CyComp for the corrugated board market
- Individual customer requirements
The Refresher Training is held on request.
Dates: 4-6 weeks after request.
Training time: Dependent on the required content 1-2 days.
The course value is 800,00 Euro per day.
(maximum 5 participants)
The Cyrel® CtP Seminar is designed for users of Computer-to-Plate systems and does provide important background information about digital imaging and processing to the key person. Knowing about these facts is imperative for archieving optimum quality in printing plates and structuring the digital workflow in a suitable and contemporary way.
This course covers:
- The Basics of Prepress – A brief introduction to electronic prepress and its terminology
- Fundamentals of Lasers and Platesetters – How do they work?
- Digital Cyrel® Plates – LAMS, Photopolymer, Dot Sharpening, etc.
- Start-up of a Cyrel® Digital Imager – What are we doing and why?
- The ideal data-workflow - Where are the differences and how do you get the optimum quality?
- Test- and Quality control procedures - The easy way to control.
- Latest updates on how to handle platesetter calibration and dot gain compensation
- Necessary background information - not only for CtP!
- The CtP platemaking process – A hands-on workshop
- Handling CtP printing samples in platemaking and printing
- Proof printing on a modern flexopress - Which parameters are relevant?
The 3-days training starts on Tuesday morning and will be finished on Thursday around lunch time. As the training starts on Tuesday at 10.00 a.m. the participants should arrive on Monday late afternoon or evening. The departure should not be scheduled prior to 4.00 pm on Thursday afternoon.
Training Dates 2009
10th - 12 February (English)
17th - 19th March (German)
1st - 3rd September (English)
3rd - 5th November (German)
The course value is 1.500,00 Euro per person.
