DuPont Home
vinyl flooring site title

DuPont™ Aspirations Installation

Follow these simple instructions to install glueless vinyl flooring.

DuPont™ Aspirations with Kevlar® Tough Performance is glass-backed cushioned vinyl flooring that can be installed using the loose-laid technique.

Using the loose-laid technique, DuPont™ Aspirations with Kevlar® Tough Performance is fit just slightly short of all vertical surfaces (1/8" to 1/4" away) so that it lies completely flat with no fullness or "pinch" points. This method for installing glueless vinyl flooring makes removal of the floor at the end of its life cycle remarkably easy.

Another benefit of installing glueless vinyl flooring is that it can be applied over many substrates that are not suitable for fully adhered products such as particleboard, chipboard, flakeboard, or lightweight concrete. Unlike the fully adhered method, the loose-laid method only permits one major seam and allows the material to be rolled back to correct any substrate problems.

To install your DuPont™ Aspirations vinyl floor, you will need tools such as glass tac tape when seaming, a seam coating kit (if seaming) and an embossing leveler. Before installing your glueless vinyl flooring, please read the following installation guidelines.

Learn how to quickly and easily install glueless vinyl flooring. Download DuPont™ Aspirations Installation Instructions here. 

DuPont™ Kevlar® is a registered trademark of E.I. du Pont de Nemours and Co. and is used under license. 

DuPont™ Aspirations
DuPont™ Aspirations

DuPont™ Aspirations with Kevlar® Tough Performance is available in a wide variety of patterns and colors to accent any home decor.